EGR klep 2002 3,8L V6 motor

Voor alle vragen betreffende Ford/Mustangs van 1994 - 2004

Moderator: Shelby GT-H

GerrieMustang
Berichten: 1
Lid geworden op: di 10 dec, 2019 17:50

EGR klep 2002 3,8L V6 motor

Bericht door GerrieMustang »

Hallo,
Ik ben eigenaar van een Ford Mustang 3.8L V6 van 2002 en heb met ongeveer 70.000 KM de foutcode P0402 al gekregen.

Wat ik kan vinden is het volgende:
P0402 Causes: Ford Mustang
Diagnosing what is causing the P0402 code in the Mustang is typically not very tricky. Here are the most common causes:

Sensor Issues– There are many sensors that the vehicles computer relies on to accurately operate the EGR system. Some of these sensors include the EVP, DPFE, and MAP sensors. When one of them goes bad, they can cause P0402.
EGR Valve Itself is Bad– The EGR valve itself is often the cause of P0402. They typically aren’t that expensive
Vacuum Issues– Some EGR valve relies on engine vacuum to operate. Others rely on an electric signal. If there is not enough vacuum present to allow for the proper operation, the EGR may not close. P0402 will then be thrown.
Sensor Issue– The Differential Pressure Feedback- EGR sensor can go faulty and cause the EGR valve to stop operating properly and throw the code.
Bron: https://www.700r4transmissionhq.com/p0402-ford-mustang/

Ik ben opzoek naar een nieuwe EGR klep, maar kan iemand mij hiermee verder helpen?
Of heeft iemand hetzelfde probleem gehad? Wat was het probleem en hoe is dit opgelost?

Ik hoor graag van jullie.

Met vriendelijke groet,
Gerrie Mustang.
Plaats reactie

Terug naar “1994 - 2004”